Hill pump

If you were able to be one of the lucky people who were able to get a code tell us here.

Hill pump

Postby chuckupton on Tue May 05, 2009 8:23 am

Does anyone know what attachments I need to use a Hill pump.??
chuckupton
 
Posts: 9
Joined: Fri Jan 16, 2009 8:57 am

Re: Hill pump

Postby sacshooter on Tue May 05, 2009 10:30 am

chuckupton wrote:Does anyone know what attachments I need to use a Hill pump.??


I don't have one, I use scba tanks to fill my air rifles. I found this:

adapter is fitted with a 1/8”BSP cone seat swivel connector. An additional adapter may be required to suit your gun.

I think you need a male 1/8”BSP to female foster fitting. I could be wrong so call Steve at Pomona Air Guns 760-244-4484 and tell him what you want to do. You need to connect the pump to a male foster fitting.

He sells the hill pump also.

http://www.pomona-airguns.com

I purchased my s410 from him, his customer service is great.

Roger
~~~~~~~~~~~~~~~~~~~~
Sacshooter aka Site Admin
~~~~~~~~~~~~~~~~~~~~
sacshooter
 
Posts: 254
Joined: Wed Jan 14, 2009 8:18 pm
Location: Sacramento, CA

Re: Hill pump

Postby Chris Chow on Thu May 07, 2009 2:34 pm

Yes, you need to buy a female Quick disconnect "foster" fitting (paintball) to attach to your Hill pump.

People call this 1/8" British Standard Pipe to female foster QD. I recommend getting the stainless steel version as they have a higher pressure rating than the brass version.

You can get them from
Tim McMurray:
http://www.mac1airgun.com/pcpcomponents.html
or
Joe Brocanto:
http://www.hamcontact.com/airgun/HoseAssembly/

I'll post a pic of my setup later tonight or tomorrow. I fill from either my Hill pump with QD foster fitting or a Carbon Fiber SCBA tank.
TalonSS in 22 cal
SigSauer 226 in 357Sig
Mac1 USFT Hunter #34 in 22 cal
RWS45 and 34 in 177
Marauder#0026 in 22 cal
Chris Chow
 
Posts: 13
Joined: Wed Apr 22, 2009 10:03 pm


Return to First 100 Owners Club

Who is online

Users browsing this forum: No registered users and 1 guest