Tuning question for newbs

The Benjamin Marauder air rifle can be tuned. You can adjust the trigger and the rifles velocities for different fill pressures.

Tuning question for newbs

Postby TandMe » Sun Jan 18, 2015 9:00 am

Just got 25 synrod. Been searching all over for this answer. When adjusting HT and HS, do I start counting revolutions from all the way in (full cw) and count coming out (ccw)? Or set all the way out (full ccw) and count revs in (cw)? I've read about tunes for days but cannot definitively find out if adjusting "in" or "out." I already set the VMS to 5.5 out (ccw) so that should be good to go. Thanks all.
TandMe
 
Posts: 5
Joined: Mon Jan 12, 2015 2:09 pm

Postby TandMe » Sun Jan 18, 2015 1:15 pm

I think I got this correct. Backed both out all the way ccw and started adjusting IN cw counting revolutions to match NIBLT. Anyway, good to be here and looking forward to slinging some lead via air as opposed to powder. So much cheaper.
TandMe
 
Posts: 5
Joined: Mon Jan 12, 2015 2:09 pm

Re: Tuning question for newbs

Postby RayK » Sun Jan 18, 2015 2:00 pm

TandMe wrote:Or set all the way out (full ccw) and count revs in (cw)?


Yes, that's it.

Ray
25 W-rod | 08 shots @ 70 FPE -2% | 3100 fill
25 M-rod | 40 shots @ 35 FPE -4% | 3100 fill
22 M-rod | 51 shots @ 25 FPE -4% | 3100 fill
17 M-rod | 50 shots @ 19 FPE -4% | 2500 fill
25 P_rod | 16 shots @ 29 FPE -3% | 2100 fill
RayK
 
Posts: 5521
Joined: Sat Jun 05, 2010 3:19 pm


Return to Marauder Tuning and Adjusting

Who is online

Users browsing this forum: Bing [Bot], Jonah and 2 guests