Motorhead wrote:A Lot bears into the "BEST" solution
If gun is a 200 bar/3000# filled gun a regulated filler such as the AV / Ninja is fine ... crank valve open and guns fill's to @ 3K
* Have a gun such as a Disco which is a 2K fill gun ... The AV / Ninja filled devise SUCKS !!!! lacking the fine control of outflow and NOT having a pressure gauge for discharge pressure
Scott, for a disco, you would want to order a 2000psi output. If you want a regulated fill system that would cover different guns with different pressures requirements, I would recommend maybe looking at a Ninja HP Fill Station. You can attach it to a bulk cylinder OR SCBA valve using CGA or DIN 300 fittings. Once you thread it on your valve, adjust the output pressure anywhere from 500psi all the way up to 4500psi. Set it to 2000psi for the Discovery and then if you have a 3000psi gun, re-adjust to 3000psi. Not only can you use this as a way to fill but you can also tether from it. Find out the optimal pressure to run your gun at, set the regulator, tether, and now youve taken the power curve out of the equation since the HP Fill Station will provide you "regulated" and very consistent shots.
If anyone is interested in a custom output pressure/preset regulators or the HP Fill Station, talk to SacShooter on here. He can source these for you guys along with our hoses, fittings, and other fill stations.
