Thanks for using this forum If you think the built in forum search function sucks, Use Googles site search below
|
|
Google +1 button removed to improve site load speed:') |
Regulator problem
Forum rules
MarauderAirRifle.com is not owned, Affiliated, or controlled by Crosman.
The Scope and goal of this section of the form is provide useful information 24/7 because I realize that most of us play with the toys on weekends when big companies and telephone support is not always available.
Normally if problems occur during this window you are SOL until the next business day (and your fun is over)
So if you are having problems check or search here to see if it is a known issue and what steps can be taken to resolve the issue.
If you ask questions on this forum, I can not guarantee Crosman support will see the post or reply to it, and you may need to give them a call at 800-724-7486 if you still need help or replacement parts.
MarauderAirRifle.com is not owned, Affiliated, or controlled by Crosman.
The Scope and goal of this section of the form is provide useful information 24/7 because I realize that most of us play with the toys on weekends when big companies and telephone support is not always available.
Normally if problems occur during this window you are SOL until the next business day (and your fun is over)
So if you are having problems check or search here to see if it is a known issue and what steps can be taken to resolve the issue.
If you ask questions on this forum, I can not guarantee Crosman support will see the post or reply to it, and you may need to give them a call at 800-724-7486 if you still need help or replacement parts.
11 posts
• Page 2 of 2 • 1, 2
Re: Regulator problem
by sr1sws » Sat Jan 03, 2015 7:51 pm
Oh, I feel your pain!
I have the AGE/Huub regulator too. I felt compelled to disassemble it, polish the edges of the Belville washers and lube with molly. Well, either I can't count the number of screw turns or something - apparently the adjustment is very sensitive.
While trying to get it reset where I wanted, I ended up with the "won't pass air" setting as well. I degassed (mostly) via the Foster connection, but there was still a couple hundred (my estimate) psi left which made removing the fill plug interesting.
I did finally get this sorted out, but that adjustment is very sensitive. Oh, I ground the screw on the first installation of the regulator.
Good luck!
Steve
I have the AGE/Huub regulator too. I felt compelled to disassemble it, polish the edges of the Belville washers and lube with molly. Well, either I can't count the number of screw turns or something - apparently the adjustment is very sensitive.
While trying to get it reset where I wanted, I ended up with the "won't pass air" setting as well. I degassed (mostly) via the Foster connection, but there was still a couple hundred (my estimate) psi left which made removing the fill plug interesting.
I did finally get this sorted out, but that adjustment is very sensitive. Oh, I ground the screw on the first installation of the regulator.
Good luck!
Steve
- sr1sws
- Posts: 15
- Joined: Mon Sep 22, 2014 4:59 pm
11 posts
• Page 2 of 2 • 1, 2
Return to Marauder Problems and Solutions
Who is online
Users browsing this forum: No registered users and 2 guests
