MarauderAirRifle.com
Marauder Air Rifle Forum & Fan Site
depinger to minimizefiring sound
Forum rules
MarauderAirRifle.com is not owned, Affiliated, or controlled by Crosman.
The Scope and goal of this section of the form is provide useful information 24/7 because I realize that most of us play with the toys on weekends when big companies and telephone support is not always available.
Normally if problems occur during this window you are SOL until the next business day (and your fun is over)
So if you are having problems check or search here to see if it is a known issue and what steps can be taken to resolve the issue.
If you ask questions on this forum, I can not guarantee Crosman support will see the post or reply to it, and you may need to give them a call at 800-724-7486 if you still need help or replacement parts.
MarauderAirRifle.com is not owned, Affiliated, or controlled by Crosman.
The Scope and goal of this section of the form is provide useful information 24/7 because I realize that most of us play with the toys on weekends when big companies and telephone support is not always available.
Normally if problems occur during this window you are SOL until the next business day (and your fun is over)
So if you are having problems check or search here to see if it is a known issue and what steps can be taken to resolve the issue.
If you ask questions on this forum, I can not guarantee Crosman support will see the post or reply to it, and you may need to give them a call at 800-724-7486 if you still need help or replacement parts.
6 posts • Page 1 of 1
depinger to minimizefiring sound
by sirpellet on Tue Nov 03, 2009 9:03 pm
can anyone provide a supplier with a quality depinger product and detailed installation instructions
- sirpellet
- Posts: 3
- Joined: Tue Nov 03, 2009 8:51 pm
Re: depinger to minimizefiring sound
by sacshooter on Fri Nov 06, 2009 9:28 pm
My friend Gene, has my Marauder, he cut a new .22 barrel for it and it is shooting better. I asked him to make me a de-pinger and he said he would. I'll report back when I test it out.
Roger
Roger
~~~~~~~~~~~~~~~~~~~~
Sacshooter aka Site Admin
~~~~~~~~~~~~~~~~~~~~
Sacshooter aka Site Admin
~~~~~~~~~~~~~~~~~~~~
- sacshooter
- Posts: 254
- Joined: Wed Jan 14, 2009 8:18 pm
- Location: Sacramento, CA
Re: depinger to minimizefiring sound
by rbolton6 on Sun Jan 03, 2010 9:44 am
Might want to give these a look
Several versions of a de-pinger for the Marauder and installation instructions
http://www.network54.com/Forum/581291/m ... he+idea....
http://www.network54.com/Forum/79574/me ... r+Depinger
http://www.pellethead.net/forums/showth ... cb5d&t=220
I actually found a piece of 1 1/4" clear tubing among my CPAP machine accessories.
It was a perfect fit in the air chamber and the ping is totally gone now.
Installation took about 15 minutes tops
Good Luck !
Several versions of a de-pinger for the Marauder and installation instructions
http://www.network54.com/Forum/581291/m ... he+idea....
http://www.network54.com/Forum/79574/me ... r+Depinger
http://www.pellethead.net/forums/showth ... cb5d&t=220
I actually found a piece of 1 1/4" clear tubing among my CPAP machine accessories.
It was a perfect fit in the air chamber and the ping is totally gone now.
Installation took about 15 minutes tops
Good Luck !
- rbolton6
- Posts: 132
- Joined: Thu Dec 10, 2009 8:48 am
Re: depinger to minimizefiring sound
by wick on Fri Jan 29, 2010 11:25 am
Can anyone atell me how to deping the Marauder? How do you remove the end cap with out marring the fitting? The web site listed showing how this is done is not working , thats for any info on this.
- wick
- Posts: 1
- Joined: Fri Jan 22, 2010 2:33 pm
Re: depinger to minimizefiring sound
by rbolton6 on Fri Jan 29, 2010 3:25 pm
loosen the two allen screws on the barrel alignment band
slide band off of the barrel and slide it back on upside down
tighten allen screws and you should be able to turn the band by hand
this will loosen the entire fitting - then just remove the fitting by hand and in-sert the de-pinger
re-insert fitting and tighten and return band to original position
BE SURE TO DE-GAS BEFORE TRYING TO REMOVE THE FITTING !!!!!!
slide band off of the barrel and slide it back on upside down
tighten allen screws and you should be able to turn the band by hand
this will loosen the entire fitting - then just remove the fitting by hand and in-sert the de-pinger
re-insert fitting and tighten and return band to original position
BE SURE TO DE-GAS BEFORE TRYING TO REMOVE THE FITTING !!!!!!
- rbolton6
- Posts: 132
- Joined: Thu Dec 10, 2009 8:48 am
Re: depinger to minimizefiring sound
by MasterWolf on Sun Oct 17, 2010 2:42 am
another trick that works - use pluming insulation
1mm thick rubber/neoprene sheet - roll and insert as per normal de-ping
actually also deadens the action noise as well
make sure you insert it all the way down to maximize the effect
i found a 4" wide section worked best
1mm thick rubber/neoprene sheet - roll and insert as per normal de-ping
actually also deadens the action noise as well
make sure you insert it all the way down to maximize the effect
i found a 4" wide section worked best
- MasterWolf
- Posts: 11
- Joined: Tue Oct 12, 2010 10:55 pm
6 posts • Page 1 of 1
Return to Marauder Problems and Solutions
Who is online
Users browsing this forum: No registered users and 1 guest
