Benjamin Marauder Troubleshooting
Forum rules
MarauderAirRifle.com is not owned, Affiliated, or controlled by Crosman.
The Scope and goal of this section of the form is provide useful information 24/7 because I realize that most of us play with the toys on weekends when big companies and telephone support is not always available.
Normally if problems occur during this window you are SOL until the next business day (and your fun is over)
So if you are having problems check or search here to see if it is a known issue and what steps can be taken to resolve the issue.
If you ask questions on this forum, I can not guarantee Crosman support will see the post or reply to it, and you may need to give them a call at 800-724-7486 if you still need help or replacement parts.
by SHOOTINIT » Tue Aug 12, 2014 4:39 pm
with no poi change it is almost boring shooting...but i'll manage. lol
99% of the time it's the shooter, not the gun.
-
SHOOTINIT
-
- Posts: 1961
- Joined: Thu Apr 18, 2013 10:13 am
by alphakilla » Sun Dec 21, 2014 6:26 am
"RayK said:
"Next I added masking tape shims to the sides of the trigger group to make it more secure in the stock and generously lubed the o-ring around the muzzle shroud spacer."
Pardon my Newbie question here..."What lube are we using?" Thanks...
-
alphakilla
-
- Posts: 39
- Joined: Thu Dec 16, 2010 2:29 pm
by RayK » Sun Dec 21, 2014 11:55 am
o-rings are always lubed with silicone grease.
Trident Diver's Grease works great.
http://www.amazon.com/Trident-Diving-Eq ... B001O768Z4Ray
25 W-rod | 08 shots @ 70 FPE -2% | 3100 fill
25 M-rod | 40 shots @ 35 FPE -4% | 3100 fill
22 M-rod | 51 shots @ 25 FPE -4% | 3100 fill
17 M-rod | 50 shots @ 19 FPE -4% | 2500 fill
25 P_rod | 16 shots @ 29 FPE -3% | 2100 fill
-
RayK
-
- Posts: 5531
- Joined: Sat Jun 05, 2010 3:19 pm
Return to Marauder Problems and Solutions
Who is online
Users browsing this forum: No registered users and 1 guest
