I am having a real blowout TANKS-Giving sale from now until Sunday Nov 30
ONLY FOR FORUM READERS. YOU WILL NOT SEE THESE PRICES ON MY WEBSITE.
Purchase my small 17 Cu Ft (110 Cu In) GUPPY and I'll discount it $75, or a new 88 Cu Ft Carbon Fiber GREAT WHITE tank (Arrive from the factory this Tuesday), and get a $100 discount (That means it is only $499 without Hose or $599 WITH HOSE ASSEMBLY, COMPLETE, ready to use with your Marauder)
YOU MUST ORDER BY SUNDAY, AND PLEASE MENTION THE TANKS-GIVING SPECIAL
Please Email, or call 714-612-5956 More info here http://www.airtanksforsale.com/thanksgiving/
With either an 88 Great White or 17 Guppy tank and Hose Assembly, you will also receive a Free Stainless Steel Male Quick Disconnect to Male Quick Disconnect Adapter to fill at a paintball shop (worth $29), and a Free Stainless Steel Dead Head (worth $19) So that is up to $148 in savings
GUPPY/GREAT WHITE available with either SCBA Valve, or DIN300
Version 1) GUPPY $249/GREAT WHITE $499 with rebuilt SCBA valve (tanks w/Red Handle, though may be a SCOTT Valve, etc. ). This would be for people that already have one of my high quality SCBA Air Hose Assemblies or prefer an SCBA Valve to fill at a Firestation, etc.
Version 1B) If you buy this tank and wish to buy my Stainless Steel SCBA Hose Assembly, I'll further discount my Stainless Steel Hose Assembly from the normal $169 down to $100 so that the total is still only $349/$599. http://www.airtanksforsale.com/hoseassembly_small.jpg
Version 2) GUPPY $349/GREAT WHITE $599 with DIN300 valve and Hose Assembly (tanks w/Gauge). Nicest you will ever see. Hoses have large strain relief on each end to help prevent kinking, with BAR & PSI scales (so no guessing about the PSI you are putting in your tank). Everything you need to fill a Marauder, from tank to hose, i.e. LARGE High Quality 2.5" Glycerin-Filled Dual BAR & PSI gauge (no guessing for PSI), Improved Bleeder, Hose with large Strain Relief at each end to prevent kinking, and Stainless Steel Female Quick Disconnect included at no additional cost. NOTE: I am now putting a 2.5" Gauge (as shown) on the GREAT WHITE and a 2" Gauge on the GUPPY, (unless you specifically ask for a 2.5"). IIThe GUPPY just looks better with that size Gauge, but I will install a 2.5" at no additinal cost if you preefer.