Thanks for using this forum If you think the built in forum search function sucks, Use Googles site search below
|
|
Google +1 button removed to improve site load speed:') |
Specific O-ring Size please:)
5 posts
• Page 1 of 1
Specific O-ring Size please:)
by Nickdizonc » Tue Mar 10, 2015 11:13 pm
I have a minor leak in the valve an gauge port area of my .25 and it is 100% due to bad orings which I'm sure have a few nicks and cuts after my most recent valve installation (GOD I HATE swapping VALVES!). Ace has a ton of orings and I'm sure they have the one I need but just in case does anyobe know the specific oring dimensions of the orings located on the gauge port
( crosman part#AS568b-118) and the one ring on the valve? same ones I believe. Thanks in advance. I need to stock up on these as I am a human oring shredder whenever I tear down my rifles.
( crosman part#AS568b-118) and the one ring on the valve? same ones I believe. Thanks in advance. I need to stock up on these as I am a human oring shredder whenever I tear down my rifles.
- Nickdizonc
- Posts: 93
- Joined: Thu Jan 22, 2015 2:29 pm
Re: Specific O-ring Size please:)
by StefanMD » Tue Mar 10, 2015 11:43 pm
It's 118 as you already said, size is 7/8" x 3/32" or 0,862" x 0.103"... 
Mrod Gen1 0.177, BSA Deer Hunter 8-32x44, Altaros reg. @1450 psi, 120 shots @12fpe SOLD
Mrod Gen1 0.22, NS Target Master FT IL 6-24x56, Altaros reg. @2000 psi, 50 shots @24fpe
Weihrauch HW100 0.177 FAC, NS Nighteater MD 8-32x60, 120 shots @12fpe
Mrod Gen1 0.22, NS Target Master FT IL 6-24x56, Altaros reg. @2000 psi, 50 shots @24fpe
Weihrauch HW100 0.177 FAC, NS Nighteater MD 8-32x60, 120 shots @12fpe
- StefanMD
- Posts: 99
- Joined: Mon Feb 10, 2014 4:52 pm
Re: Specific O-ring Size please:)
by Nickdizonc » Wed Mar 11, 2015 3:53 am
Thanks Stefan! I'm a NOOB to orings sizes so I had no idea that 118 meant a specific size. if you could direct me to a oring reference link that would be helpful. but for now you gave me precisely what I needed. muchos gracias kind sir:)
- Nickdizonc
- Posts: 93
- Joined: Thu Jan 22, 2015 2:29 pm
Re: Specific O-ring Size please:)
by StefanMD » Wed Mar 11, 2015 5:51 am
That would be: http://www.oringsandmore.com/bulk-rubbe ... for-50-pc/
I bought a lot of o ring from that store for my Marauders and Benjamin Hand Pump and they are excellent!
I bought a lot of o ring from that store for my Marauders and Benjamin Hand Pump and they are excellent!
Mrod Gen1 0.177, BSA Deer Hunter 8-32x44, Altaros reg. @1450 psi, 120 shots @12fpe SOLD
Mrod Gen1 0.22, NS Target Master FT IL 6-24x56, Altaros reg. @2000 psi, 50 shots @24fpe
Weihrauch HW100 0.177 FAC, NS Nighteater MD 8-32x60, 120 shots @12fpe
Mrod Gen1 0.22, NS Target Master FT IL 6-24x56, Altaros reg. @2000 psi, 50 shots @24fpe
Weihrauch HW100 0.177 FAC, NS Nighteater MD 8-32x60, 120 shots @12fpe
- StefanMD
- Posts: 99
- Joined: Mon Feb 10, 2014 4:52 pm
Re: Specific O-ring Size please:)
by PB_Matrix » Wed Mar 11, 2015 6:15 am
Smoothing out the leading edges of machined cuts in the pressure tube help reduce cuts in the O-rings immensely
- PB_Matrix
- Posts: 163
- Joined: Thu Mar 20, 2014 4:23 am
5 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 2 guests
