Thanks for using this forum If you think the built in forum search function sucks, Use Googles site search below
|
|
Google +1 button removed to improve site load speed:') |
tunning help
3 posts
• Page 1 of 1
tunning help
by mercurymaurader » Sun Mar 15, 2015 2:13 pm
I bought a .25 cal mrod off a friend that told me he was messing with the settings drunk one night and needless to say its all messed up. I was wondering how I could get it back to stock settings, ive tried to do it myself but I cant get it to shoot hard at all. It feels like it barely has enough power to launch it out of the barrel. Its a genII btw. Any help would be apreciated I was thinking of sending it in but if I can do it myself I would like to do that. Thanks for all the help this forum offers.
- mercurymaurader
- Posts: 3
- Joined: Sun Mar 15, 2015 1:48 pm
Re: tunning help
by RayK » Sun Mar 15, 2015 8:43 pm
Here are some better-than-stock settings:
VMS 5.5 (there is a set screw on top of the actual adjuster screw)
Hammer Throw 2
Hammer Spring preload 6
Make sure the breech o-ring is in place (just inside the barrel where the magazine goes).
Ray
VMS 5.5 (there is a set screw on top of the actual adjuster screw)
Hammer Throw 2
Hammer Spring preload 6
Make sure the breech o-ring is in place (just inside the barrel where the magazine goes).
Ray
25 W-rod | 8 shots @ 70 FPE -2% | 3100 fill
25 M-rod | 40 shots @ 35 FPE -4% | 3100 fill
22 M-rod | 51 shots @ 25 FPE -4% | 3100 fill
17 M-rod | 60 shots @ 19 FPE -4% | 2500 fill
25 P_rod | 16 shots @ 28 FPE -4% | 2100 fill
25 M-rod | 40 shots @ 35 FPE -4% | 3100 fill
22 M-rod | 51 shots @ 25 FPE -4% | 3100 fill
17 M-rod | 60 shots @ 19 FPE -4% | 2500 fill
25 P_rod | 16 shots @ 28 FPE -4% | 2100 fill
- RayK
- Posts: 5371
- Joined: Sat Jun 05, 2010 3:19 pm
Re: tunning help
by mercurymaurader » Mon Mar 16, 2015 11:56 am
I have no clue what was done to the settings so I need them set back to stock so I can go from there. Or is there a way I can get it to those settings with the way it is now all jacked up
- mercurymaurader
- Posts: 3
- Joined: Sun Mar 15, 2015 1:48 pm
3 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 4 guests
