Straight clip magazine for marauder?

[caniborrowsomeammo]

At least you can mount the sight. I learned a long while back, now I keep an extra set of adapters around, just in case.

[robble]

Got the red dot today. Even with the adapter that's about 10 mm talk it is still 15mm lower than the scope was. Accuracy improved a lot. I'm sure it'll be even better when I get those low profile adapters.

Thanks to the person that recommended a red dot. I like it. An easy way to explain it to someone in the future that had never looked through one would be "imagine a red laser sight but you only see the laser when you look through the lens"

[robble]

Oh yea, I discovered you can use credit card reward points to buy stuff on Amazon. I've had one card about 15 years and never used any points on the dumb stuff the card company wanted me to use them on. Turns out I had almost 60,000 points. So I ordered a marauder .22 pistol, laser, and a bunch of various pellets.

[Sandspike]

Oh yea, I discovered you can use credit card reward points to buy stuff on Amazon. I've had one card about 15 years and never used any points on the dumb stuff the card company wanted me to use them on. Turns out I had almost 60,000 points. So I ordered a marauder .22 pistol, laser, and a bunch of various pellets.

You found your Secret Santa. Merry Christmas.

[Bob La Londe]

Oh yea, I discovered you can use credit card reward points to buy stuff on Amazon. I've had one card about 15 years and never used any points on the dumb stuff the card company wanted me to use them on. Turns out I had almost 60,000 points. So I ordered a marauder .22 pistol, laser, and a bunch of various pellets.

Saaaaa-Weet!

[SHOOTINIT]

if you have a bore laser you can see what your scope is doing at different distances ...

my volunteer finder
dot and laser

[robble]

Hmm I have been wanting a bore sighted...

[robble]

Ok, been reading reviews on lots of boresighters.

Then realized - e all have baffles / ldc's. I have a feeling this affects which ones are best for us or even work.

I was as looking at one that uses a magnet and attaches to end of barrel. It seems to depend on how straight and square the end is. http://www.amazon.com/gp/aw/d/B007WQJCWC?vs=1# I'll also be using it for a umarex fusion

Recommendations up to ~$100?

[RayK]

You could always remove the shroud and air stripper, then insert the bore sight directly in the barrel end.

Ray

[robble]

It will be a different poi with and without the shroud.