.25 marauder reservior extension

[coaxialtasko]

I have tried tightening it different ways usind orings that came with it and no matter what at 900psi the air leaks out 'cause it's not sealed good enough.I have used two bottles of air tring to solve this.I really want to use the extension can someone advise me please? I'm at the point of begging for help!

[RayK]

Where are you located?

I'd try some fresh o-rings and lube them with silicone grease.

But if you did all that and it is still leaking, you need to try some smoke or soapy water to see exactly where it is leaking.

Ray

[coaxialtasko]

when I use soap to find leak do I just trynew orings and silicone after and how hard are you supposed to tighten it? Thanks for your help.

[PB_Matrix]

Make sure the extension is round by rolling it on a flat surface, like a piece of plate glass, check the threads to see if they are cut uniformly and are not damaged, if those things check out, then try a few wraps of Teflon tape on the threads.

[coaxialtasko]

will try all suggestions and let you know if that works.

[oldpro]

If all that fails use some plumbers tape on threads

[SHOOTINIT]

wrong orings?

[BlackICE]

Teflon tape is a poor bandaid for something that should be air tight from an O ring seal. Teflon tape should be only needed on tapered threaded "pipe" joints.

[coaxialtasko]

I'musing 2 orings that come with it. What other size or tpye oring should I try instead?

[AwesomeAnt]

Get in touch with the manufacturer if all else fails. I've had issues with things and the manufacturer has always had a answer that solved MY problem. These people tend to be nice and a wealth of info. GL