Supercharged86 wrote:Hey Tony, Doesn't the extension tube need external threads on one end? thanks. Steve
Steve - you loosen the set screw and remove the
barrel shroud mount which is threaded, (I believe it's part # 20)slide the new extension on and then slide the shroud mount back on and tighten the set screw. Now you still have the threads to screw the shroud back on. The shroud spacer on the muzzle end of the barrel has to come off in order to slide the new barrel spacer on but you can just tap the it off. I also ground a small flat spot on the barrel for the new location of the shroud mount set screw. Here's mine along with a Gred Davis Air Tube extension.
My spacer was made for me by a buddy. I had already bought some extra baffles to experiment with by adding a washer in them to create another chamber so I was good to go.
After trying numerous combinations and sequence of baffles, I've since removed the extra washers. I believe it was getting louder instead of more quiet.
Staying with the 6 stock baffles.Bob