Ninja 90ci portable fill station .... Wow very nice !

3rd Party Stocks, Barrels, Regulators, air tube extensions, etc. and where to find them.

Ninja 90ci portable fill station .... Wow very nice !

Postby Motorhead » Fri May 31, 2013 11:33 am

Having picked up one of these from Ninja direct, been using for the past 3 weeks or so and LOVING IT !
90 cu In is able to fill my M-rods from 1500# to 2850# @ 4-5 times pending fill in tank :roll: ( 4500# rated tho Shoebox fills to @ 4900# )

Here the unit as delivered by Ninja


Well not being satisfied with the filler configuration went about changing it up so filler could stay attached All The Time and especially while being carried into the field.
* So ... went about changing 3 items :D


1) Add a 45* HP fitting on fill valve.
1) Add shorty SS flex hose between valve and bleeder manifold.
1) Add a 1 foot HP flex hose. *Micro bore hose also available.
** Also a SPIFFY Tank Bra that is a Ninja direct item only **
* Used a piece of double sided Velcro to make a strap holding bleed manifold secure to side of tank/bra.





Now the tank / filler set is so compact it can stay screwed together 24/7 with no reason to take apart like the original factory configuration :D :D :D

Scott
Regulated Custom M-rods - Pupped .22 / Thumbhole .177 / .20 Conversion
Air Arms TX-200 MkIII .177
FWB 124D .177
Diana 75 HV TO-1 Match .177
Barnett Spitfire .177
Regulated BAM-51 .177
Crosman PC77 & SSP-250 .177
Bug-A-Salt
4.5k ShoeBox / Ninja 90
User avatar
Motorhead
 
Posts: 1262
Joined: Fri Dec 30, 2011 4:23 pm
Location: Northern California U.S.A.

Ninja 90ci portable fill station .... Wow very nice !

Postby ShawnHu » Fri May 31, 2013 2:34 pm

Check mine out Motorhead.

viewtopic.php?t=6935
ShawnHu
 
Posts: 588
Joined: Mon Jul 23, 2012 9:07 pm

Re: Ninja 90ci portable fill station .... Wow very nice !

Postby Motorhead » Fri May 31, 2013 4:13 pm

ShawnHu wrote:Check mine out Motorhead.

viewtopic.php?t=6935



There ya GO :D SAME BASIC THING , Tho do like those ASA's that do an auto bleed off when knob is backed off. Eliminates need for the purge block ;)
The Ninja 90 as shown assembled is @ 14" end to end ... What length the 68 at ?
Regulated Custom M-rods - Pupped .22 / Thumbhole .177 / .20 Conversion
Air Arms TX-200 MkIII .177
FWB 124D .177
Diana 75 HV TO-1 Match .177
Barnett Spitfire .177
Regulated BAM-51 .177
Crosman PC77 & SSP-250 .177
Bug-A-Salt
4.5k ShoeBox / Ninja 90
User avatar
Motorhead
 
Posts: 1262
Joined: Fri Dec 30, 2011 4:23 pm
Location: Northern California U.S.A.

Ninja 90ci portable fill station .... Wow very nice !

Postby ShawnHu » Fri May 31, 2013 6:15 pm

Same length, the ASA adds an inch or so. There are some 112 CI out there I might be interested in.
ShawnHu
 
Posts: 588
Joined: Mon Jul 23, 2012 9:07 pm


Return to Marauder Aftermarket Parts and Accessories

Who is online

Users browsing this forum: No registered users and 3 guests