by lamerabbit on Thu Nov 04, 2010 9:01 am
Burris signature rings are all I use on most of my rifles, and all my air rifles. With the rimfire/airgun version you will have to shim the clamp side of the mount between the scope rail, (receiver) you can use a cut up aluminum can, or brass shim stock to make the mount sit dead level. However the Burris plastic inserts with all of their adjustment makes them worth using, plus they never leave a ring mark, or shift zero. You will also need the insert kit with all three sizes, so add 9.95 to the price of the rings.
If you have a 30MM scope tube, you will have a problem, but you can get a RF to Weaver conversion mount for about 10 dollars and get the Burris signature 30 MM rings! Again you may or may not need to shim these conversion bases.
Jim