MarauderAirRifle.com

[warrior23]

The Mrod stock screw on my 22cal was very loose,I tightened it up but Im not sure what the torque settings are does anyone know?Also was think of putting alittle blue loctite on it would that be a problem.

[Supercharged86]

Warrior23, Not aware of any torque setting other than just snug enough. I know what your saying though, it seems like if your not careful you'll over tighten it and pull the bushing right through the stock. Just remember, you have a steel bolt going into the aluminum trigger housing, I might be a little reluctant to use the loctite?? Cheers. Steve