lets see your accurate 177 pics

[StefanMD]

I usually shot 5 for group but my friend took 3 shots and I took 3 shots at the right target (challenge was that the loser will pays caffe tommorow ), I don't think it's a lucky shot because groups are almost the same, right (my) group is only slightly smaller that the left one.

I forget to say, all shooting is done with single shot adapter.

[skunkhome]

Ten rounds at 30 yards off sandbag. Factory "tune" with Pete's aluminum airstripper/shroud mount. AA DFH 10.3gr

[the sloth]

Spent a little time tonight sighting in a new scope (upper right cross), a Hawke Eclipse 6x24. Then put 5 shots into each of the Shoot-n-c targets.

22 yd. distance, shooting AA Field Heavy 10.34 @ ~900 FPS. Prone with bipod and rear beanbag. Stock 1st gen Marauder w/TKO LDC.

At first I had to stop and double check that the gun was firing correctly and hitting the target... quickly realized that pellets were just going into the same hole Love this gun!

[Motorhead]

Dug around finding this older picture of 10 shots at 50 yards.
group was shot off side bed of my PU truck and NOT on bags.

[russinbaja]

I'm not a very good shot

[russinbaja]

Got some luck with the wind this morning. I still need to shoot over the crony and do some basic adjustments. I'm not getting close to the shot count I should.

[Milo]

interested in seeing pics of you guys accurate 177 marauders and what optics and stocks your using thanks

Here is 177 mrod with custom tube made from 2024-t3 aluminum ,I move the gage to the front ,max fill only 2500 psi ,60 shots per fill from 2500 to 15000,regulated at 1600 psi.i also make my own regulators by searching the forum for the info the last couple years,the rifle only weighs about 7 pounds.

[sr1sws]

interested in seeing pics of you guys accurate 177 marauders and what optics and stocks your using thanks

Here is 177 mrod with custom tube made from 2024-t3 aluminum ,I move the gage to the front ,max fill only 2500 psi ,60 shots per fill from 2500 to 15000,regulated at 1600 psi.i also make my own regulators by searching the forum for the info the last couple years,the rifle only weighs about 7 pounds.

Any chance of you posting plans for a regulator? I have a mini-lathe and "motivation"

Thanks!
Steve