MarauderAirRifle.com

[randy6]

hey can you guys help me out,i pulled the bolt out of my mrod ,went to put it back in and now its jamed about 3/4 of an inch in,it wont go in and wont come out,please help.

[ssa]

How do you pulled the bolt out and put it back in?
Do you have any pellet in the barrel when you jam the bolt?

To take out the bolt, you need to unscrew #26 & #7.
When you install the bolt, screw #7 should not be over tighten.

[Jason]

The big set screw on top with the spring and plunger that holds the bolt closed probably went down in the hole that the little screw up front goes in. Take the big set screw out and the bolt should remove easily. You might have to take whatever scope you have on it off to be able to get a big flathead bit to it. Be careful and make sure it fits well so you don't mess up the screw.