Help support the forum and get %15 Off the Marauder and Accessories direct from Crosman using the coupon code MROD4RUM by CLICKING HERE

[Nick]

I had an air leak so I took the air tank portion apart and cleaned it up. wow it was full of crud. O ring grooves were caked with hard crusty material too but it came clean with a bit of work. O rings themselves looked OK so i put it all back together used pure silicone grease cinched it up. Got on my pump and could hear air escaping from magazine/breech area. I looked at the degasser port on the back and it does not look right. Can that hang up and stay open? That's what I think..... Would appreciate any ideas, suggestions, direction to get this baby working again.