MarauderAirRifle.com

[airgunenthusiast]

Yesterday I noticed that my Marauder pistol bolt handle operation was not smooth anymore. Cocking the pistol became increasingly difficult to the point that I could no longer cock the pistol nor move the cocking handle. So I unscrewed/removed the barrel shroud along with the 4 small bolts that fasten the breech to the air tube. I found that a loose cocking lug was binding against the air tube which prevented the pistol from being cocked. Tightening the cocking lug corrects the problem. I know of at least one new Marauder pistol owner that had this same problem. So below is a guide to tightening the cocking lug.

With the breech removed I also changed the cocking handle position. I am right handed so I switched the cocking handle position from the right side of the pistol to the left side.



I thought I would pass this information along.
Dan

[spysir]

Thank you for taking the time to share, great pictures also!
John

[Thumpman1]

nice post and thanks for sharing.

Ronnie Easton MD in Sacramento.