MarauderAirRifle.com

[captwoody]

well i drilled out my valve port to .121 and my fps went up 100 fps for a top of 758 at 2200 psi. now i am waiting for the brown truck for my shroud exstension. dont think i need the res exstension though. from 2800-1000 i got 48 usable shots from 560 -758fps with the cros premiers hp. when she was below 600 fps she was real mouse fart like. above 600 more like rat farts not bad but noticable change and on the border of backyard friendly

thanks for the help-woody

[slayer1962]

No offense but does it group that poorly even if you reduce shot count?
If I am over an inch with my marauder rifle I would be upset.
I know you have the pistol but is that acceptable accuracy for them?
I want minute of squirrels head at 30 yards!

[captwoody]

If i was shooting a variable power scope and i was taking my time i might worry but a red dot has no magnification and i was cranking the rounds out quickly so not to concerned til i get a AO Scope on her not to worried

[captwoody]

Shroud exstension from jgaska(marmot militia on the yellow board) came in yesterday all i can say is woo-hoo mouse fart SBD. and for 28 bucs what a steal. easy install as they come for the p-rod. unscrew cap, screw on ext., screw cap back on fire. love these boards i am now shooting 750's with 14.7's cphp's with the most backyard friendly appeal i have ever seen. if you have a prod for 28 bucs this is a must do just for the OMG factor. later woody

[stony30]

Do you have a link to order and a picture ? thx

[captwoody]

I do not know how to copy the linc but it is on the yellow forum under classifieds as mrod,prod extensions there are picture there. marmot militia is his screen name

[captwoody]

will add more pics when the tippman adapter comes in and she has a 4 x16 centerpoint on her now and yes the groups shrank

[captwoody]

here she is finished and proof of her killing ability

now the22 mrod needs to go to MRODMIKE and get that 25cal fpe. thanks everyone for your help-woody

[RayK]

Hi all.

I agree, drilling out the port ID to 1/8" is a great modification, but Prod owners should be sure they take care of all waranty work before doing any disassembly of the gun.
Disassembling or modifying any parts voids the waranty.

Ray

[NeuRon]

Good stuff, woody!