Marauder and Night Vision

Have pictures of the Marauder that you want to show off?
Post them here.

Marauder and Night Vision

Postby Bruce Jarrett on Fri Dec 03, 2010 6:37 pm

This is my .25 Cal Marauder with a Leapers 3-12x44AO Swat Scope and a PS22 HPT Night Vision Scope with IR Illuminator.
Image
Bruce Jarrett
 
Posts: 49
Joined: Sat Oct 16, 2010 7:04 pm

Re: Marauder and Night Vision

Postby ssscottg on Fri Dec 03, 2010 8:32 pm

That night vision equipment is awesome!
ssscottg
 
Posts: 109
Joined: Thu Feb 11, 2010 10:30 pm
Location: Sacramento CA

Re: Marauder and Night Vision

Postby Artilheiro on Sat Dec 04, 2010 12:35 pm

Could you specify the make and model? You can tell the price and where it was purchased?
User avatar
Artilheiro
 
Posts: 31
Joined: Fri Dec 04, 2009 9:17 am

Re: Marauder and Night Vision

Postby Bruce Jarrett on Sat Dec 04, 2010 2:11 pm

The Day scope is the one at this link.
http://www.pyramydair.com/s/a/Leapers_A ... _Tube/2263
The Night Scope is the one in this link.
http://www.atncorp.com/nightvision-daynight-atnps22-hpt
The Night Scopes can be found on line at a lot of stores with a wide range of prices and quality. Cabala's is the only store in my area that sells them but I bought mine on line.
Bruce Jarrett
 
Posts: 49
Joined: Sat Oct 16, 2010 7:04 pm

Re: Marauder and Night Vision

Postby daboss on Fri Jan 21, 2011 12:22 pm

2nd or 3rd gen, no picture of tube thru scope? are you resting nvg on barrel? im new hear but i use nvg goggle with dbal on my maud. i love nvg bling
daboss
 
Posts: 1
Joined: Fri Jan 21, 2011 12:17 pm

Re: Marauder and Night Vision

Postby Bruce Jarrett on Sat Jan 22, 2011 11:20 am

It's a 2nd gen HPT which is a high end 2nd gen. The specs are about the same as a 3rd gen. The link I posted shows the specs, resolution is 54-72 lp/mm. The NV scope is not touching the barrel it is very close but not touching. I had to use high rings on the day scope so that the NV would clear the barrel. The NV scope clamps on the day scope using different adapters according to the size of the bell of your day scope. I have four different adapters so it will go on all my rifles with bells from 18 - 54 like my AR15, FNFAL, 6mm Bolt,7mm Mag, 22 pump etc. each adapter has a range of bells it will fit on. I haven't tried taking photos through a scope before but I'll see what I can do.
Bruce Jarrett
 
Posts: 49
Joined: Sat Oct 16, 2010 7:04 pm

Re: Marauder and Night Vision

Postby Bruce Jarrett on Sun Jan 23, 2011 10:02 am

I tried during the day with the day scope only to take some pictures but the eye relief is just to small to get a picture. Also tried at night with a different day scope and the NV scope but still couldn't get a picture.
Bruce Jarrett
 
Posts: 49
Joined: Sat Oct 16, 2010 7:04 pm


Return to Photos

Who is online

Users browsing this forum: No registered users and 1 guest