Here they are together I made the Blackhawk stock fit my .25 with a little work. On the Mrod is a UTG Accushot S.W.A.T. 8-32x56mm with attached UTAC Green Laser and UTG 260 lumen floodlight both on pressure switches. In the rear sits a Hawk bubble level. Up front is a UTG adjustable 9-16 inch panning Bi-Pod.
Lil P boasts a UTG Accushot S.W.A.T. as well in 4-14x44mm with attached UTG red laser also pressure switched. In front is a UTG 4-9in panning Bi-Pod I am however waiting on custom machined swivel studs to secure the Bi-Pod from Jim Gaska.
Both are consistently shooting better than quarter size groups at 30-40yd. I did all the tuning on my own with the help of fellow forum members. The Mrod .25 has the air stripper drilled out , Bstaley tune with a buna 70 and a buna 90, i tapped my hammer for a set screw, 15# hammer spring, wide open un capped valve and custom gauge block and transfer port from Addicted2Airguns, and obviously a custom Blackhawk Knoxx Axiom stock originally for a Ruger 10/22.
The Prod has the air stripper drilled as well, a TKO Stage V LDC, a tapped hammer set screw, a heavy hammer spring i custom Dremmeled to size not sure the weight but .47 thick wire, 3 o ring Bstaley mod, the valve and breech drilled bigger to 11/64 for my .164 transfer port made of Ice Maker tubing, and on the valve I installed a custom light valve spring too.
The mrod shoots JSB Exact kings for a clip barely bigger than a dime at 40yd and averaging 1012fps, and Eun Jin 43.2's for 8 shots about quarter sized at 40yd averaging 855fps. Full nuts i can get 2-3 shots at 85-89fpe!
Lil P is slingin a clip of Crosman Priemier Domes 14.3 gr an average of 949 fps and 8 shots of Eun Jin 28.5 gr Domed at an average of 798.9 fps the groups are about a hair shy of quarter sized at 30 yd.
Thanks for all the help guys my scope mount for my Sony HD camera comes tomorrow so soon hopefully some hunting vids!